We want to make the search for your perfect machine as easy as possible for you. For this reason it is necessary that we save the information relating to your visit to our site in cookies.
Without these cookies it is unfortunately not possible to use this website.
If you are not in agreement with this and you choose to leave the website, then all information related to your visit will be deleted from the server.
3rd party Cookies are required to use this site
Scoring Saw Blades have 2 parts and can be adjusted to the thickness of the main saw blade with a shim set. They feature square carbide teeth and posi-tive hook. The scoring saw blades rotate in the opposite direction to the main saw blade.
The single handed adjustment system ensures quick and accurate setting of the rip fence. The standard rip capacity is 31” (800 mm) or an optional 49” (1250 mm). The easy to read rip scale is perfectly integrated into the saw table. The aluminum rip fence extrusion can be slid backwards to optimize the feed of workpieces.
Stable and compact spindle unit for long lasting precision
- Maximum tooling above the table 4” (100 mm)
- Table opening 7” (180 mm)
- 4 speeds 3000, 6000, 8000, 10,000 rpm
- 14,000 rpm high speed router spindle in place of the shaper spindle.
(must be ordered before the machine is produced).
- Smooth rearward tilt to 45°
- Height adjustment with cast iron segment
All Felder shapers have standard equipment including a tilting shaper spindle 90°–45°. Due to the tilting shaper spindle, the range of applications and savings of tooling cost may be much higher than you have expected. Using the handwheel causes the whole shaper spindle unit to tilt to the desired angle easily and smoothly to the back.
The crosscut fence 51” (1300 mm) for crosscuts between +45° and –45°. The fence can be attached to the sliding table with out the use of tools. The end stop provides you with the exact 90° position. The beveled miter scale with hairline readout is visible from the operating area and thus allows exact reading of the required crosscut value.
“X-Roll” table extension with P-coupling
Large dimensioned and designed for maximum load bearing capacity, the aluminium format sliding table "hovers" on the 'X-Roll', a highly developed guiding technology. The X shape ("X-Roll") design of the rollers distributes the load optimally on all sides. The linear surface of the steel rollers running on the hardened and ground guiding surface guarantees unbeatable precision and smoothness. "X-Roll" will guarantee you the quality and precision that you expect from your new tilting spindle shaper.
The patented double-mitre gauge from Felder allows for mitre cuts on pieces with different widths and at any angle.
Easy to use: Simply enter the desired angle as well as the widths of your work pieces on the keyboard. Immediately you will receive the settings and can set the electronic double miter gauge accordingly.
The fence stop on the fence can be adjusted up to 53” with the scale.
Depending on set angles, the lengthcompensating vernier scale will allow you to set the exact work piece length when you do angle cuts.
- Easy clamping of workpieces with maximum flexibility, can be used on all panel saws and spindle moulders that have a sliding table.
- Magnetic fitting makes it easy to install and adjust
- Safety cylinder ensures maximum work safety
- Pressure bar function possible with every sliding table length
- Locking height 95 mm
- Clamp. force approx. 300 kg